Tosyalı Holding Dijital Katalog

Symbols and Abbreviations Used for Chemical Elements	Symbols and Abbreviations Used for Mechanical Testing
Symbol	Element	Symbol	Element
C	Carbon	Re	Yield Strength (N/mm 2)
Mn	Manganese	Rm	Tensile Strength (N/mm 2 )
P	Phosphor	Rp0,2	Tensile Strength at elevated temperature
S	Sulphur	A	Elongation (%)
Si	Silicon	A5	Elongation (L0 =5,65x√S 0 )
Al	Aluminum	A50	Elongation (L 0 =50 mm)
Cu	Copper	A80	Elongation (L 0 =80 mm)
N	Nitrogen	A100	Elongation (L 0 =100 mm)
O	Oxygen	A200	Elongation (L 0 =200 mm)
H	Hydrogen	S 0	Section Area for Sample (mm 2)
Ca	Calcium	L 0	Initial Length For Sample (mm)
Ti	Titanium	d	Thickness (mm)
V	Vanadium	t	Ton
Cr	Chrome	Darbe	Impact Test
Ni	Nickel	KVc	Impact Energy, Joule (J)
Mo	Molybdenum	Sıc.	Test Temperature (0C)
Nb	Niobium	Katlama	Bend Test
B	Boron	kmy	Bend Test Mandrel Radius (mm)
Sn	Tin	kmç	Bend Test Mandrel Diameter (mm)
Fe	Ferro	en	Sample from Perpendicular to Rolling Direction
Zn	Zinc	boy.	Sample from Rolling Direction
Pb	Lead	HRB	Hardness - Rockwell
As	Arsenic	ppm	Parts per Million
W	Volfram	DWTT	Drop Weight Test
Zr	Zirconium	Std.	Standard

GENERAL STRUCTURAL STEELS SUITABLE FOR COLD FORMING, BENDING and PLASTERING
Standard: EN 10025-Part 2-2004
Chemical Composition (%)
Tosçelik Quality No	Standard	Quality		C (maks.)		Mn	P	S	Ca	Al(1)	Ceq(2)
Tosçelik Quality No	Standard	Quality		d≤16	16	max	max	max	max	min	max
TOS3550	EN 10025-2	S235JRC	Standard	0.17	0.17	1,4	0.035	0.035	20	0.020	0.35
TOS3552	EN 10025-2	S235J2C	Standard	0.17	0.17	1,4	0.025	0.025	20	0.020	0.35
TOS3556	EN 10025-2	S235JRC+N	Standard	0.17	0.17	1,4	0.035	0.035	20	0.020	0.35
TOS4550	EN 10025-2	S275JRC	Standard	0.21	0.21	1,5	0.035	0.035	0.55	0.020	0.40
TOS4552	EN 10025-2	S275J2C	Standard	0.18	0.18	1,5	0.025	0.025	20	0.020	0.40
TOS4556	EN 10025-2	S275J2C+N	Standard	0.18	0.18	1,5	0.025	0.025	20	0.020	0.40

Explanations

1) If the chemical composition of the steel contains min. 0.020% aluminum, the upper limit of nitrogen is not applied.

2) For the calculation of Ceq, the formula %CE (IIW) = C+Mn/6+(C+Mo+V)/5+(Ni+Cr)/15 is used.

GENERAL STRUCTURAL STEELS SUITABLE FOR COLD FORMING, BENDING and PLASTERING
Standard: EN 10025-Part 2-2004
Chemical Composition (%)
Tosçelik Quality No	Standard	Quality		C (maks.)		Si	Mn	P	S	Cu	Al(1)	N(1)	Ceq(2)
Tosçelik Quality No	Standard	Quality		d≤16	16	max	max	max	max	max	min	max	max
TOS5580	EN 10025-2	S255JRC-Düşük Si	Standard	0.24	0.24	0.55	1,6	0.035	0.035	0.55	-	0.012	0.45
TOS5581	EN 10025-2	S355J0C-Düşük Si	Standard	0.24	0.24	0.55	1,6	0.035	0.035	0.55	-	0.012	0.45
TOS5582	EN 10025-2	S355J2C-Düşük Si	Standard	0.20	0.20	0.55	1,6	0.025	0.025	0.55	-	-	0.45
TOS3552	EN 10025-2	S355J2C	Standard	0.20	0.20	0.55	1,6	0.025	0.025	0.55	0.020	-	0.45
TOS5536	EN 10025-2	S355J2C+N	Standard	0.20	0.20	0.55	1,6	0.025	0.025	0.55	0.020	-	0.45
TOS5550	EN 10025-2	S355JRC	Standard	0.24	0.24	0.55	1,6	0.035	0.035	0.55	-	0.012	0.45

Explanations

1) If the chemical composition of the steel contains min. 0.020% aluminum, the upper limit of nitrogen is not applied.

2) For the calculation of Ceq, the formula %CE (IIW) = C+Mn/6+(C+Mo+V)/5+(Ni+Cr)/15 is used.

GENERAL STRUCTURAL STEELS SUITABLE FOR COLD FORMING, BENDING and PLASTERING
Standard: EN 10025-Part 2-2004
Mechanical Properties
Tosçelik Quality No	Standard	Quality	Re		Rm(2)		A(%), min.					Impact (length)(4)
			N/mm²		N/mm²		A80				A5		KVc
			min.	min.
			d : thickness, mm		d : thickness, mm		d : thickness, mm					Temp.	min
			≤16	16	<3	3 ≤ d< 40	1 < d ≤ 1.5	1.5 < d ≤ 2	2 < d ≤ 2.5	2.5 < d ≤ 3	3 ≤ d ≤ 40	ºC	J
TOS3550	EN 10025-2	S235JRC(2)	235	225	360 - 510	360 - 510	16	17	18	19	24	20	27(5)
TOS3552	EN 10025-2	S235J2C	235	225	360 - 510	360 - 510	16	17	18	19	24	-20	27(5)
TOS3556	EN 10025-2	S235JRC+N (1)(2)	235	225	360 - 510	360 - 510	16	17	18	19	24	20	27(5)
TOS4550	EN 10025-2	S275JRC (2)	275	265	430 - 580	410 - 560	14	15	16	17	21	20	27(5)
TOS4552	EN 10025-2	S275J2C	275	265	430 - 580	410 - 560	14	15	16	17	21	-20	27(5)
TOS4556	EN 10025-2	S275J2C+N (1)(2)	275	265	430 - 580	410 - 560	14	15	16	17	21	-20	27(5)

Explanations

1) For the qualities with "+N" in the quality code, "hot forming" and/or "normalizing" can be performed by the customer.

2) For the qualities with "C" in the quality code, "cold forming" and/or "cold flanging" can be performed by the customer.

3) Tensile test values are valid for "transverse" test samples.

4) Impact test is not applied for products with a thickness less than 6 mm.

5) Impact test is done upon request.

GENERAL STRUCTURAL STEELS SUITABLE FOR COLD FORMING, BENDING and PLASTERING
Standard: EN 10025-Part 2-2004
Mechanical Properties
Tosçelik Quality No	Standard	Quality	Re		Rm(3)		A(%), min.					Impact (length) (4)
			N/mm²		N/mm²		A80				A5		KVc
			min.	min.
			d: thickness, mm		d: thickness, mm		d: thickness, mm					Temp.	min
			≤16	16	<3	3 ≤ d< 40	1 < d ≤ 1.5	1.5 < d ≤ 2	2 < d ≤ 2.5	2.5 < d ≤ 3	3 ≤ d ≤ 40	ºC	J
TOS5580	EN 10025-2	S355JRC-Low Si	355	345	510-680	470-630	13	14	15	16	20	20	27(5)
TOS5581	EN 10025-2	S355J0C-Low Si	355	345	510-680	470-630	13	14	15	16	20	0	27(5)
TOS5582	EN 10025-2	S355J2C-Low Si	355	345	510-680	470-630	13	14	15	16	20	-20	27(5)
TOS3552	EN 10025-2	S355J2C	355	345	510-680	470-630	13	14	15	16	20	-20	27(5)
TOS5536	EN 10025-2	S355J2C+N	355	345	510-680	470-630	13	14	-	16	20	-20	27(5)
TOS5550	EN 10025-2	S355JRC	355	345	510-680	470-630	13	14	15	16	20	20	27(5)

Explanations

1) For the qualities with "+N" in the quality code, "hot forming" and/or "normalizing" can be performed by the customer

2) For the qualities with "C" in the quality code, "cold forming" and/or "cold flanging" can be performed by the customer

3) Tensile test values are valid for "transverse" test samples.

4) The impact test is not applied for products with a thickness below 6 mm.

5) Impact test is done upon request.

Tosçelik Quality No	Standard	Quality	Bending (1) (width, ≤90°, btmr)
			Thickness , d (mm)
			6 < d ≤ 7	7 < d ≤ 8	8 < d ≤ 10	10 < d ≤ 12	12 < d ≤ 14	14 < d ≤ 16	16 < d ≤ 18	18 < d ≤ 20
TOS5580	EN 10025-2	S355JRC-Low Si	-	-	-	-	-	-	-	-
TOS5582	EN 10025-2	S355J2C-Low Si	12	16	20	25	32	36	45	50
TOS3552	EN 10025-2	S355J2C	12	16	20	25	32	36	45	50
TOS5536	EN 10025-2	S355J2C+N	12	16	20	25	32	36	45	50
TOS5550	EN 10025-2	S355JRC	-	-	-	-	-	-	-	-

Explanations

1) The values are valid for bending tests performed at angles of 90 degrees and less.

Certificate Name	Inspection Type
TS ISO / IEC 27001: 2013	Information Security Management System
ISO / 14001:2015	Environmental Management System
ISO 5001:2011	Energy Management System
OHSAS 18001:2007	Occupational Health and Safety Management System
ISO 9001:2015	Total Quality Management System
BS EN ISO 9001:2015	Long Products
Document of Environmental Permission and Licence	Production
TSE Competence Certificate	Long Products
CE Marking Certificate	Flat Products

Institution	Country of Receipt	Standard
TUV	TÜRKİYE	ISO 14001:2015
TUV	TÜRKİYE	OHSAS 18001:2007
TUV	TÜRKİYE	ISO 9001:2015
CARES	TÜRKİYE	ISO 9001:2015 BS 4449:2005
Ministry of Environment and Urbanisation	TÜRKİYE	National Legislations
TSE	TÜRKİYE	TS 708
CARES	UNITED KINGDOM	CARES Sustainability Scheme Appendix 01
CARES	UNITED KINGDOM	BS EN ISO 9001